-
product description They have good weather resistance and dispersibility. They can not only resist ultraviolet rays, but also have high temperature resistance. They can be mixed with most base materials such as acrylic resin, amino alkyd resin or nitrocellulose. They can be made into automobile, motorcycle and bicycle topcoats, furniture topcoats, electrical finishing coatings, architectural Satin decorative coatings and powder coatings. Mixing with transparent plastics such as polystyre... -
Product description Physical and chemical indexes of sericite powder Dry silk mica Main physical indicators BaiDu(%) PH value Loss on ignition (%) Moisture (%) > 75 6-8 4-6 <0.8 Main chemical composition SiO 2 Al 2 O 3 K 2 O Fe 2 O 3 S, P 60-75 13-17 4-5 <1.8 0.02-0.03 Wet silk mica Main physical indicators BaiDu(%) Sand content (%) Attached water (%) PH value Loose density g / cm 3 > 80 <0.5 <0.... -
Product description Product characteristics of glass beads: 1. Both soft and hard – produced from high-quality materials, which has certain mechanical strength and sufficient elasticity, can be used repeatedly for several times, is not easy to break, and the sprayed devices have the same effect. 2. Good uniformity – large rounding rate and uniform particle size. After spraying, the brightness coefficient of the sandblasting device remains uniform, and it is not easy to leave ... -
Physical and chemical properties of vermiculite The chemical composition of vermiculite Composition SiO2 Al2O3 Fe2O3 FeO MgO TiO2 K2O H2O Content ( % 37-45 8-18 3-10 1-3 10-22 1-1.5 2-8 10-21 Physical and chemical properties Specific gravityg / cm3 Expanded vermiculite bulk weight kg / m3 PH value Hardness Refractory melting point Refractive index 2.2-2.6 80-200 6.28 1.3-1.6 1300-1370 1.52-1.65 Uses of vermiculite Used for thermal insulation Expanded vermiculite has the charac... -
Product description Refer to the method of incubating eggs with sediment Egg placement and humidity control are similar to those of incubating eggs with sediment, but compared with incubating eggs with sediment, it has more advantages: 1. Because of its light weight and convenient operation, it is also convenient to check the development of eggs; 2. Because of its good thermal insulation performance, it is not easy to be affected by the outside world; 3. Because of its good moisturizing perfo... -
-
Product description Dehydrated mica has many special properties and is widely used in many fields because its water content is about 10 times lower than that of ordinary mica. In industry, it is mainly used as insulating material for electrical equipment and electrical equipment by its high electrical insulation and heat resistance, as well as its strong acid, alkali, compression and peeling properties. It is mainly used in the fields of electricity, national defense, building materials,... -
Product description Mechanism of negative ions produced by tourmaline filter material 1. After the product is formed, the water molecules in the air enter the mineral crystal through the pores of the polymer film to form a permanent electric field space, and are ionized into hydrogen oxygen ions and hydrogen ions: H2O → OH – + H+ 2. H + moves rapidly to the negative pole of permanent electric field and absorbs electrons to form H2 to escape into the gas: 2H + + 2e – → H2 3. OH ... -
Product description Product characteristics of glass beads: 1. Both soft and hard – produced from high-quality materials, which has certain mechanical strength and sufficient elasticity, can be used repeatedly for several times, is not easy to break, and the sprayed devices have the same effect. 2. Good uniformity – large rounding rate and uniform particle size. After spraying, the brightness coefficient of the sandblasting device remains uniform, and it is not easy to leave ...
-
Product description Light specific gravity and large volume. The density of hollow glass beads is about one tenth of that of traditional fillers. After filling, it can greatly reduce the base weight of products, replace and save more production resins and reduce the cost of products. With organic modified (lipophilic) surface. Hollow glass beads can be easily wetted and dispersed, and can be filled in most thermosetting thermoplastic resins, such as polyester, epoxy resin, polyurethane, etc. ... -
Product description In terms of insulating materials Many foreign manufacturers have long used wet mica in the manufacture of rubber tires. From the surface to prevent the adhesion of inner and outer tires, it is also used as the release agent of rubber products, in addition, it is used to manufacture cables, which not only improves the insulation, but also prevents the sheath from hardening and the adhesion of cable cores. In terms of Plastics (1) The unique flake structure of mica makes it ... -
Product description Physical and chemical indexes of sericite powder Dry silk mica Main physical indicators BaiDu(%) PH value Loss on ignition (%) Moisture (%) > 75 6-8 4-6 <0.8 Main chemical composition SiO 2 Al 2 O 3 K 2 O Fe 2 O 3 S, P 60-75 13-17 4-5 <1.8 0.02-0.03 Wet silk mica Main physical indicators BaiDu(%) Sand content (%) Attached water (%) PH value Loose density g / cm 3 > 80 <0.5 <0....
